Bent-over Back Raises – “Good Morning”

Bent-over Back Raises —”Good Morning”

The good morning exercise has a pleasant-sounding ring to it and is frequently associated with a simple, almost casual “awakening-to-the-day” activity; it may be thought of s being similar to throwing one’s hands overhead in a satisfying stretch. However, while the good morning exercise appears to have a simple stretching quality attributed to it, what should be remembered is that the exercise is designed to work the lower back. Whenever an attempt is made to exercise the region of the lower back great care must be taken to perform highly-concentrated movement applications. The good morning exercise provides an excellent manner in which to build the lumbar muscle which gives the thick well-muscled ridges on each side of the vertebral column. The benefits of developing the lower lumbar muscle extend beyond mere aesthetic value. Strengthening the lower lumbar region can prevent the onset of severe injury to the region of the lower back during the performance of other exercises. However, strict attention must be paid to proper movement methodology in order to provide for the safe, efficient application of this highly-valuable but deceivingly-dangerous exercise.

Considerations for Twisting Application Not advised for Beginning Students

It should be noted that the good morning exercise activates the erector spinae and transversospinal muscle groups. However the rotatores muscles are not activated in the conventional straight up-and-down application. A twisting action must be employed in order to activate the rotatores but it is advised that the beginning weight-training student refrain from twisting actions as great strain (torque) can be exerted upon the vertebral column exposing the trainee to high injury-risk.

Light Weight, Slow Movement Advised

Advanced trainees should utilize caution when performing the twisting variation of the good morning exercise. Very light resistance should be used and highly-controlled slow speed-ofcontraction movement applications should be utilized in order to reduce the high risk of injury associated with rotatores muscle activation.

Summary of Correct Exercise Execution

It is recommended that the beginning weight-training student use only natural body weight in learning this exercise. Resistance can be added once the rudiments of correct exercise execution have been learned. If resistance is used, a barbell would be positioned at the top of the trapezius (just slightly higher than would be the position of the barbell for the squat exercise). – Assume the correct preparatory stance by placing the feet at shoulder-width distance and bending the knees slightly in effort to provide for the alleviation of the potential strain (torque) on the lower back. Be sure to raise the head and to maintain a flat, stabilized position of the back to protect the lumbar region from potential injury. – Slowly initiate the eccentric contraction phase of the movement by bending forward at the waist. You will need to utilize strong neural impulsing into the muscles of the lower back in order to provide highly-controlled slow speed-of-contraction movement applications. Remember, the gluteals and hamstrings will want to take over control of the movement so a high level of concentration is needed to direct the impulses into the lower back muscles. – Complete the eccentric contraction phase of the exercise by lowering the torso to a position that is slightly-above parallel to the floor. Bending lower than the slightly-above parallel position encourages a breakdown in proper posture which can create injuries to the lower back. Lowering the body too far also induces a resulting “whipping” action of the torso during the initiation of the subsequent concentric contraction. You will want to remember to maintain the flexed position of the knees throughout the movement application. – Pause slowly at the completion of the eccentric phase of the movement and initiate the concentric contraction phase of the exercise by slowly raising the upper torso. You will need to concentrate fully in order to direct the neural-impulses into the muscles of the lower back. – Slowly complete the concentric contraction phase of the movement by establishing a vertical position of the body. You will want to resist the tendency to rise up too quickly and force the upper torso back to parallel. If the movement is carried too far there will be pressure exerted upon the vertebrae, disks, and facet joints of the lower lumbar region. – Pause at the fully-extended concentric contraction position and before initiating the eccentric contraction phase of the exercise.

Keys to the Lift -

Be conservative when selecting the resistance to be used in this exercise. – Maintain the knees-bent, head-up, flat-back posture throughout the entire execution of the movement in effort to avoid straining the lower lumbar region. – Apply highly-concentrated slow speed-of-contraction movement applications to avoid having momentum take over control of the movement and to optimize the effects of this exercise upon the muscles of the lower back. – Utilize the slightly-above-parallel-to-the-floor position of the upper torso in the eccentric contraction phase of the movement and a true vertical (not past) position of the upper torso during the concentric contraction phase of the movement.

Lower Back Intro

Lower Back Training

Highly Vulnerable to Injury
The area that comprises the lower back is responsible for more dehabilitating injuries than any
area of the body. In fact, injuries sustained to the region of the lower back ruins more weight-training
careers than the rest of the body combined. Lower back pain and injury are not only prevalent in
weight-resistance training but in everyday “civilian” activity as well. How many times have we heard
about someone bending over to tie a shoelace and then not being able to straighten up? Or how
about the weekend-at-the-cottage syndrome where an unsuspecting victim has reached for a tow line
on the row boat or stretched down to gather some firewood and was left bent-over in agony. Acute
(or chronic) aching-back symptoms plague almost everyone at one time or another in their lives.

Why is it that the lower back is so highly vulnerable to injury?

Poor Mechanical Advantage
The foremost cause of lower back ailment is due to the extremely poor mechanical advantage of
the vertebral column. Whenever a person bends forward during the performance of an activity, from
lifting a bag of groceries to executing the initiation of the concentric contraction phase of the deadlift
exercise, great force is exerted upon a specific area of the vertebral column. The forces that are applied
are: the resistance that is being moved; the weight of the upper torso; and the force of gravity
(9.8 m•s-2). If the combined forces were to be endured by the entire structure of the vertebral column
the risks would be significantly reduced. However, as the forces are focused upon just two or three
vertebrates, the stress upon a small portion of the vertebral column is all too often of sufficient magnitude
to cause injury to the vertebrates, the discs, or the facet joints located on the vertebral column.

Muscles of the Lower Back Weak
Not helping the cause is the fact that the muscles of the region are often underdeveloped and as
a result are too weak to provide sufficient support to the area. Without proper assistance from the
surrounding muscle groups, the bony structure of the vertebral column is forced to endure the
stresses of the forces placed upon the region of the lower back.

Abdominal Muscles Weak
Additional problems arise from the fact that they rarely are the individual’s abdominal muscles
developed to the point where they could provide support for the duress placed upon the lower back.
Poorly-developed abdominals force the vertebral column to endure the forces placed upon the region
of the lower back. Conversely, strong abdominal muscles can provide ample support for the
muscles of the lower back and work in harmony to protect the vulnerable vertebral column from
stress-related injury.

Hamstring Muscles Not Flexible
Another major contributing factor to lower back injury is the lack of fully-stretched and welldeveloped
hamstring muscles. Most people have not done anything to provide for development of
their hamstrings as a result whenever they attempt to bend down to lift something they exert great
force upon the lower back. As the muscles of the lower back are not usually worked in everyday activities
they too are weak. The hamstring muscles insert into the pelvic region. If the hamstrings are
inflexible, they are not able to stretch out and “cushion” the effects of the load. The exerted forces
pull the pelvis downward creating a stretching of the lower back muscles which can cause injuries to
the muscular structure of the region.

When weight-resistance trainees attempt to work their lower backs through bending movements,
the exertion upon the lower back is severely magnified. If the hamstrings have not been worked and
are neither strong nor flexible, and if the abdominal muscles have not been developed, the forces that
are directed into lower back easily overpower the relatively weak muscles of the region. Without support
from the lower back muscles the vertebral column is forced to endure the force of the load.

Poorly-Applied Movement Methodology
The one area of consideration that the athletes have control over is the quality of their movement
methodology; yet, many weight-resistance trainees approach their back training with reckless
abandon. Poor exercise execution represents the single-most preventable cause of lower back ailment.
Poor exercise execution is fostered mainly by the fact that few athletes understand the basis of
vulnerability the lower back is exposed to. If the trainees were fully aware of the dangers involved in
poorly-applied technique in lower back training it is presumed that they would pay more attention to
detail when executing the various lower back exercises. The keys to success in providing for safe and
efficient training of the lower back are:
- Establish and maintain proper posture throughout the lift in order to reduce the stress exerted
upon the lower back;
- Utilize strong neural-impulsing into the muscles of the lower back to protect the vertebral column.

Location and Function
There are two basic sets or groups of spinal muscle that comprise the region of the lower back.
There is a deeply-set group known as the transversospinal muscles and a superficial group known as
the erector spinae muscles. Both muscle groups are covered by a thick sheath of muscle tissue known
as the thoracolumbar fascia which inserts along the origins of the latissimus dorsi. It should be noted
that fascia does not have the flexibility of muscle and as a result is highly-vulnerable to injury during
stress-related actions of poorly-performed exercise execution.

Erector Spinae Muscle Group
The superficial erector spinae muscle group is comprised of three separate (but intertwined)
muscles: iliocostalis (thoracis, and lumborum); longissimus dorsi; and spinalis dorsi. Together these
muscles cover the vast region between the neck to the sacrum which is located on the posterior portion,
and on both sides of the spine. The erector spinae muscles comprise the large ridges that can be
seen running down the length of the mid-line of a well-developed back.

Iliocostalis — Thoracis (A1), Lumborum (A2), Cervicis (A3)
The most laterally located of the erector spinae muscle group the iliocostalis (thoracis and lumborum)
muscle originates on the crest of the ilium and inserts into the nos. These two related muscles
act strongly to rotate the vertebral column.

Longissimus — Dorsi (B1), Cervicis (B2), Capitis (B3)
The longest of the erector spinae muscles, the longissimus dorsi runs almost the full length of
the area of the back. It originates from the most lateral projections of the vertebrae (transverse
processes), and insert in transverse processes which are located superiorly to their location. The longissimus
dorsi is involved in rotation of the spine.

Spinalis (C)
The spinalis muscle is the most medially located muscle of the erector spinae group and, unlike
the semi-spinalis muscle which originated at the mid-way point of the back, travels the entire length
of the mid-line of the back. It originates from the spinous process of the lumbar and thoracic (lower)
regions and insert in the thoracic and cervical vertebrae. The spinalis is involved in rotation of the
spine.

Transversospinal Muscle Group
The deep spinal muscle group derives its name from the location of the fibers which run from
the transverse process to the spinous process of the vertebrae. The transversospinal group is comprised
of the interspinalis (semi-spinalis), intertransversarii, rotatores, and multifidus muscles which
are generally structured in pairs.

Interspinalis (Semispinalis)
The interspinalis or semi-spinalis (as it is sometimes better known)—as its name would imply—
takes its place of origin at about the mid-portion of the vertebral column from the lower thoracic
vertebrae and will generally insert on the fifth to seventh vertebrae which are slightly superior (above)
its location. The interspinalis muscle is involved in the action of extension of both the cervical and.
thoracic vertebrae. This muscle is also involved in the action of rotation of the vertebrae.

Intertransversarii
Takes its place of origin along the vertebral column and attaches to the adjacent vertebrae. This
muscle is involved in extending the vertebral column.

Rotatores
The rotatores muscles originate on the transverse process of one
vertebra and insert into the spinous process of the next superior vertebrae.
This origin and insertion structure of the rotatores muscles
(as their name would imply) provide for a rotating action of the trunk
and are also involved in extension of the vertebral column.

Multifidus (D)
The multifidus muscle has the most fibers and is the thickest and
thus strongest of the transversospinal muscle group. This muscle is
situated in the hollows on either side of the vertebrae. The fibers of
this muscle take their origin from an inferior (lower) vertebra and
insert on superior (usually more than two) vertebrae. The multifidus
muscle aids in the action of rotation of the vertebral column and it
serves to stabilize the vertebral column during lifting actions.